|
|
Post by gremlin2033 on Sept 15, 2017 19:46:33 GMT
|
|
|
|
Post by technician275 on Sept 15, 2017 22:45:30 GMT
Hi Gremlin2033
what you have is part of the message. you are missing the heading of the message, which has the "key" letters required to help decode the message.
that part should look some thing like this "2330 1tlr 1tle 80 GVX OTK" its the last six letters at the end required to help decode the message. yes you need the sheet, NAMXZ at the start contains the machine settings, if you look at the sheet MXZ is on the sheet so you set the machine for tag 08.
you where did get the message from? if you don't mind me asking>
PS I'm the one that's makes lots of errors when I encode messages(king of the typo)
OIK
|
|
|
|
Post by mauser on Sept 18, 2017 8:45:59 GMT
MEHHM YOU HAVE SOLVED THE CACHE X IT IS AT NORTH FOUR ZERO DEGREES THREE SIX X FOUR FIVE SIX AND WEST ZERO SEVEN SIX DEGREES THREE SIX X FOUR SEVEN ONE X THE POSTED CORDINATES ARE FOR PARKING X Decoded in 4.09 seconds. Did not need the start setting, ran through all settings for a 3-wheel. Made assumption (correctly) that they put MXZ so you could set up the machine. Plugged in the stecker, the inner ring settings and the wheels, and pressed go. Answer above. BTW, start setting is AJJ. Mauser sends. |
|
